Concox X1
X1 Multi Functional Vehicle GPS Tracker
Pinpoint vehicles with this innovative X1 vehicle GPS tracker. Through easy-to- useplatform, it provides you up-to- the-minute speed, location updates and various alertsand reports. Apart from functions like two-way talk, voice monitoring, X1 is alsoequipped with multiple interfaces for camera, LCD, RFID, etc. It is an invaluable toolfor fleet management, logistics, car rental and buses.
FEATURES
GPS+GSM Positioning
High accuracy GPS positioning with U-Blox chipset
Two-way Talk
With MIC and speaker, it realizes two-way communication
1-Wire®
Interface for temperature sensors and i-Button driver ID
Internal 3-axis Accelerometer
Driving behavior monitoring, power saving and motion detection
RS232
Rich Peripheral Accessories Supporting Fuel Level Sensor, RFID Reader, Camera.
Multiple Alarms & Reports
Fuel cut-off/geo- fence alarm and direction change/mileage report, etc
FOTA
Firmware upgrade using GPRS network
Built-in Battery
Low power consumption and long standby with internal 600mAh battery
SPECIFICATIONS
GSM Specification
| Communication System | GSM |
| GSM Module | SIMCOM800 |
| GSM Frequency | GSM 850/900/1800/1900MHz |
GPS Specification
| GPS Module | U-blox7Q |
| Location accuracy | <10 meters |
| Tracking sensitivity | -161dBm |
| Switch | 1 SOS Button, 1 power switch | LED indicator | 3 LED lights indicating GPS/GSM/External power status |
| Input voltage | DC 11~36V/1.5A |
| Flash memory | 8MB ( GPRS data 20400 units, SMS data 700 units) |
| Sensor | 3D accelerator sensor |
| Operating temperature | -20℃ ~+70 ℃ |
| Device weight | 160g |
| Device dimension | 90×60×27mm |
| TTFF (open sky) | Avg. hot start ≤1sec Avg. cold start ≤35sec |
| Humidity | 5%~95% |
| Battery | 600mAh/3.7V |
| Internal Battery Life | 15 hours in sleep mode, and 6 hours in normal working mode |
| Power consumption | 30-35mA standby current |
| Max output | 4 Digital inputs - 1 negative input, 1 positive input, 2 custom input (Default 1 positive input, 1 negative input ) 2 Analog input AD1: 0~6V AD2: 0~12V 2 Output 1 RS232 port (camera/RFID reader/ two-way calling) 1-Wire protocol (Temperature sensor/i-Button) 1 Impulse detection (Default speedometer detection) 1 USB port |
Downloads
Our Range of Products
